Ignition-switched positive, fused (terminal 15a), fused by S6 (5 A, terminal 15)
Net nc29d4bb9 · one diagram
- Function
- Ignition-switched positive, fused (terminal 15a), fused by S6 (5 A, terminal 15)statedBasis: splice A38 is named so in the legend
- Also named
- Ignition-switched positive, fused (terminal 15a)
- Wire
gr/ro- Models
- B7 only
- Drawn in
- 1 diagram, 4 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
1 guessed component
What is on this wire
Supply (1)
Fuses, the battery, alternator, ignition switch, and pins marked with a supply terminal (30, 15, 75, X, 50, 87).
S6pin6aFuse in fuse holder/relay panel
Parts (2)
Splices (1)
A38Plus connection -2- (15a), in instrument panel wiring harness
Inline connectors (3)
Where these parts are
| Part | Location |
|---|---|
G65 | Wired into the instrument panel wiring harnessinferred from wiring |
G238 | Wired into the instrument panel wiring harnessinferred from wiring |
S6 | Fuse panel at the left end of the instrument panel, fuse No. 6manual text p. 1113 p. 1117 |
A38 | Splice inside the instrument panel wiring harnesssheet legend |
T10ac | not stated |
T10c | On lower left A-pillar, behind trimmanual text p. 1100 p. 1101 |
T10d | On lower left A-pillar, behind trimmanual text p. 1100 p. 1101 |
Drawing
Wires are gr/ro (grey/red) unless a colour is written on them. 7 parts and points, 6 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet. "→ track" is a reference box: the wire continues on that track, at the stretch its page link points to.
- guess: the component label is not right at the symbol; the part was assigned by position.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.