G452 · Seat Occupied Recognition Pressure Sensor
- Name
- Seat Occupied Recognition Pressure Sensor
- Type
- sensor
- Models
- B7 only
- Diagrams
- 2
Location
Shown in the manual's location figures: Passive Occupant Detection Systemmanual figure Manual pages 1186
Area: Seats
Articles
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
Pins printed without a connector code likely Module links
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
1 | bl 0.35 mm² | not stated | J706/7 | B7 only | 410 638 |
2 | br/gn 0.35 mm² | not stated | J706/6 | B7 only | 410 638 |
3 | gr/ge 0.35 mm² | not stated | J706/15 | B7 only | 410 638 |
Diagrams
- 54 · Airbags and Safety Belt Tensioners B7 · From November 2004
- 105 · Airbags and Safety Belt Tensioners B7 · From 2006 m. y.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.