Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Wire between G452 and J706

Net n275fc74f · joined across diagrams

Function
G452 Seat Occupied Recognition Pressure Sensor — line to J706 Seat Occupied Recognition Control Module 7endpoints only
Basis: named after the two parts it connects
Wire
bl
Models
B7 only
Drawn in
2 diagrams, 2 stretches
Checked
Not checked by hand. Extracted from the manual automatically.

1 join between diagrams

What is on this wire

Parts (2)

  • G452pin 1Seat Occupied Recognition Pressure Sensor
  • J706pin 7Seat Occupied Recognition Control Module

Where these parts are

PartLocation
G452Shown in the manual's location figures: Passive Occupant Detection Systemmanual figure p. 1186
J706Its wires run through T17k (In passenger's Seat)inferred from wiring

Drawing

Wires are bl (blue) unless a colour is written on them. 2 parts and points, 1 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.

54 · Airbags and Safety Belt Tensioners B7 · 1 stretch

Diagram 54 page · joined to other diagrams at G452/1

Page 410manual · Right Safety Belt Switch, Seat Occupied Recognition Control Module, Seat Occupied Recognition Pressure Sensor, Seat Occupied Recognition Safety Belt Force Sensor

TrackWireFromToNotes
71bl 0.35 mm²G452 1J706 7
105 · Airbags and Safety Belt Tensioners B7 · 1 stretch

Diagram 105 page · joined to other diagrams at G452/1

Page 638manual · Safety Belt Switch, Seat Occupied Recognition Control Module, Seat Occupied Recognition Pressure Sensor

TrackWireFromToNotes
71bl 0.35 mm²G452 1J706 7

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.