G113 · Back Pressure Flap Motor Position Sensor
- Name
- Back Pressure Flap Motor Position Sensor
- Type
- sensor
- Models
- B6 and B7
- Diagrams
- 3
Location
Part of Air Flow Flap Motor -V71-manual text Manual pages 1173
Other location statements (1)
- Wired into the A/C wiring harnessinferred from wiring
Area: Instrument panel
Articles
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
Pins printed without a connector code likely Sensors & Switches
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
1 | br/sw 0.35 mm² | Ground (terminal 31)stated | E87/B/14, G112/1, G143/1, G135/1, G143/3, G220/1, G221/1, G261/1, G262/1, G263/1, G89/1via 97 | B6 only | 291 976 |
1 | br/ws 0.35 mm² | Ground (terminal 31)stated | G112/1, G143/1, J255/B/14via 97 | B7 only | 418 |
2 | bl/ro 0.35 mm²gr/gn | not stated | E87/B/7 | B6 only | 291 976 |
2 | gr/gn 0.35 mm² | not stated | J255/B/7 | B7 only | 418 |
3 | ro/bl 0.35 mm²sw | 5 Voltsstated | E87/B/1, G112/3, G135/3, G220/3, G221/3, G143/3, G143/1via L31 | B6 only | 291 976 |
3 | sw 0.35 mm² | 5 Voltsstated | G112/3, G135/3, G143/3, G220/3, G221/3, J255/B/1via L31 | B7 only | 418 |
Diagrams
- 34 · Automatic Climate Control B6 · From 2004 m. y.
- 56 · Automatic Climate Control B7 · From November 2004
- 317 · Automatic Climate Control B6 · From 2002 m. y.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.