Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Wire between E24 and J285 (+1)

Net n3582e4a1 · one diagram

Function
E24 Left Safety Belt Switch — line to J285 Control module with indicator unit in instrument panel insert T32a/30endpoints only
Basis: named after the two parts it connects
Wire
gr/swbr
Models
B6 only
Drawn in
1 diagram, 2 stretches
Checked
Not checked by hand. Extracted from the manual automatically.

What is on this wire

Supply (1)

Fuses, the battery, alternator, ignition switch, and pins marked with a supply terminal (30, 15, 75, X, 50, 87).

  • J285pin T32a/30Control module with indicator unit in instrument panel insert

Parts (1)

  • E24pin 4Left Seat Belt Switch

Inline connectors (1)

  • T8bpin 88-Pin Connector, black, seat wiring connector station, driver seat

Where these parts are

PartLocation
E24Wired into the airbag wiring harnessinferred from wiring
J285Behind display unitmanual text p. 1125
T8bUnder driver's seatmanual text p. 1100

Drawing

Wires are br (brown) unless a colour is written on them. 3 parts and points, 2 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet. "→ track" is a reference box: the wire continues on that track, at the stretch its page link points to.

307 · Airbag for driver, passenger with seat belt tensioner and side Airbag B6 · 2 stretches

Diagram 307 page

Page 920manual · Igniters for belt tensioner rear, Seat Belt Switches, Left Front Seatbelt Microswitch

TrackWireFromToNotes
76gr/sw → br 0.35 mm²→ track 97 (p. 921)E24 4
via T8b/8

Page 921manual · Drivers and Passengers Front airbag Crash Sensor, Control module with indicator unit in instrument panel insert

TrackWireFromToNotes
97gr/sw 0.35 mm²J285 T32a/30→ track 76 (p. 920)

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.