Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Wire between G453 and J706 (+1)

Net nf31ed9a0 · joined across diagrams

Function
G453 Seat Occupied Recognition Safety Belt Force Sensor — line to J706 Seat Occupied Recognition Control Module 16endpoints only
Basis: named after the two parts it connects
Wire
br/ws
Models
B7 only
Drawn in
2 diagrams, 2 stretches
Checked
Not checked by hand. Extracted from the manual automatically.

1 join between diagrams

What is on this wire

Parts (2)

  • G453pin 3Seat Occupied Recognition Safety Belt Force Sensor
  • J706pin 16Seat Occupied Recognition Control Module

Inline connectors (1)

  • T17kpin 1217-Pin Connector, in passenger's Seat

Where these parts are

PartLocation
G453Its wires run through T17k (In passenger's Seat)inferred from wiring
J706Its wires run through T17k (In passenger's Seat)inferred from wiring
T17kIn passenger's Seatsheet legend

Drawing

Wires are br/ws (brown/white) unless a colour is written on them. 4 parts and points, 4 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.

54 · Airbags and Safety Belt Tensioners B7 · 1 stretch

Diagram 54 page · joined to other diagrams at G453/3

Page 410manual · Right Safety Belt Switch, Seat Occupied Recognition Control Module, Seat Occupied Recognition Pressure Sensor, Seat Occupied Recognition Safety Belt Force Sensor

TrackWireFromToNotes
79br/ws 0.35 mm²G453 3J706 16
105 · Airbags and Safety Belt Tensioners B7 · 1 stretch

Diagram 105 page · joined to other diagrams at G453/3

Page 638manual · Safety Belt Switch, Seat Occupied Recognition Control Module, Seat Occupied Recognition Pressure Sensor

TrackWireFromToNotes
79br/ws 0.35 mm²G453 3J706 16

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.