Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G453 · Seat Occupied Recognition Safety Belt Force Sensor

Name
Seat Occupied Recognition Safety Belt Force Sensor
Type
sensor
Models
B7 only
Diagrams
2

Location

Its wires run through T17k (In passenger's Seat)inferred from wiring · 6 wires

Other location statements (1)
  • Shown in the manual's location figures: Passive Occupant Detection Systemmanual figure p. 1186

Area: Seats

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links

PinWireFunctionConnects toModelsSheets
3
br/ws 0.35 mm²
not statedJ706/16B7 only410 638
4
ge/ws 0.35 mm²
not statedJ706/4B7 only410 638
5
ge/ro 0.35 mm²
not statedJ706/14B7 only410 638

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.