Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

V318 · Left Dynamic Cornering Light Motor

Name
Left Dynamic Cornering Light Motor
Type
motor
Models
B7 only
Diagrams
2

Location

Wired into the interior wiring harnessinferred from wiring · 2 of 2 named splices on its wires

Other location statements (1)
  • Its wires run through T17a (Connector station - left A-pillar)inferred from wiring

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Motors/actuators

PinWireFunctionConnects toModelsSheets
1
gn/gr 0.35 mm²
ws/ro
CAN High of J431's own bus to the cornering light motors V318 and V319 (not the drivetrain CAN)stated
J431/18, V319/1
via B229
B7 only469
1
ws/ro 0.35 mm²
CAN High of J431's own bus to the cornering light motors V318 and V319 (not the drivetrain CAN)stated
J431/18, V319/1
via B229
B7 only711
2
gn/ro 0.35 mm²
ws/gr
CAN Low of J431's own bus to the cornering light motors V318 and V319 (not the drivetrain CAN)stated
J431/19, V319/2
via B230
B7 only469 711

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.