Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

CAN Low of J431's own bus to the cornering light motors V318 and V319 (not the drivetrain CAN)

Net n6362bbd6 · joined across diagrams

Function
CAN Low of J431's own bus to the cornering light motors V318 and V319 (not the drivetrain CAN)statedcorrected
Basis: corrected (c-0036); splice B230 is named so in the legend
Wire
gn/rows/gr
Models
B7 only
Drawn in
2 diagrams, 8 stretches
Checked
Not checked by hand. Extracted from the manual automatically.

1 join between diagrams2 guessed components

What is on this wire

Parts (3)

  • J431pin 19Headlight Range Control Module
  • V318pin 2guessLeft Dynamic Cornering Light Motor
  • V319pin 2guessRight Dynamic Cornering Light Motor

Splices (1)

  • B230Low-Bus Connection (in interior wiring harness)

Inline connectors (3)

  • T10ypin 110-Pin Connector, blue, connector station A-pillar, right
  • T17apin 117-Pin Connector, red, connector station A-pillar, left
  • T17cpin 117-Pin Connector, red, connector station A-pillar, right

Where these parts are

PartLocation
J431Behind glove boxmanual text p. 1124
V318Wired into the interior wiring harnessinferred from wiring
V319Wired into the interior wiring harnessinferred from wiring
B230Splice inside the interior wiring harnesssheet legend
T10yConnector station A-pillar, rightsheet legend
T17aOn lower left A-pillar, behind trimmanual text p. 1100 p. 1101
T17cOn lower right A-pillar, behind trimmanual text p. 1099

Drawing

Wires are gn/ro (green/red) unless a colour is written on them. 10 parts and points, 11 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet. "→ track" is a reference box: the wire continues on that track, at the stretch its page link points to.

  • guess: the component label is not right at the symbol; the part was assigned by position.
64 · Headlights with High Intensity Gas Discharge (HID) "Bi-Xenon" lamps, Cornering Light and Automatic Headlight Beam B7 · 5 stretches

Diagram 64 page · joined to other diagrams at J431/19

Page 468manual · Level Control System Sensors

TrackWireFromToNotes
27gn/ro 0.35 mm²splice B230→ track 55 (p. 470)
27gn/ro 0.35 mm²J431 19splice B230
28gn/ro 0.35 mm²splice B230→ track 32 (p. 469)

Page 469manual · Left High-intensity Gas Discharge Lamp

TrackWireFromToNotes
32gn/ro → ws/gr 0.35 mm²→ track 28 (p. 468)V318 2
via T17a/1

Page 470manual · Right High-intensity Gas Discharge Lamp

TrackWireFromToNotes
55gn/ro 0.35 mm²→ track 27 (p. 468)V319 2
111 · Can-Bus wiring B7 · 3 stretches

Diagram 111 page · joined to other diagrams at J431/19

Page 711manual · Headlamp Range Control Module, Steering Column Electronic Systems Control Module

TrackWireFromToNotes
24gn/ro 0.35 mm²J431 19splice B230
26gn/ro 0.35 mm²V318 2guesssplice B230
via T17a/1
28gn/ro 0.35 mm²V319 2guesssplice B230
via T17c/1

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.