Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

CAN High of J431's own bus to the cornering light motors V318 and V319 (not the drivetrain CAN)

Net n8209478c · joined across diagrams

Function
CAN High of J431's own bus to the cornering light motors V318 and V319 (not the drivetrain CAN)statedcorrected
Basis: corrected (c-0035); splice B229 is named so in the legend
Wire
ws/rogn/gr
Models
B7 only
Drawn in
2 diagrams, 8 stretches
Checked
Not checked by hand. Extracted from the manual automatically.

1 join between diagrams2 guessed components

What is on this wire

Parts (3)

  • J431pin 18Headlight Range Control Module
  • V318pin 1guessLeft Dynamic Cornering Light Motor
  • V319pin 1guessRight Dynamic Cornering Light Motor

Splices (1)

  • B229High-Bus Connection (in interior wiring harness)

Inline connectors (3)

  • T10ypin 810-Pin Connector, blue, connector station A-pillar, right
  • T17apin 1417-Pin Connector, red, connector station A-pillar, left
  • T17cpin 1417-Pin Connector, red, connector station A-pillar, right

Where these parts are

PartLocation
J431Behind glove boxmanual text p. 1124
V318Wired into the interior wiring harnessinferred from wiring
V319Wired into the interior wiring harnessinferred from wiring
B229Splice inside the interior wiring harnesssheet legend
T10yConnector station A-pillar, rightsheet legend
T17aOn lower left A-pillar, behind trimmanual text p. 1100 p. 1101
T17cOn lower right A-pillar, behind trimmanual text p. 1099

Drawing

Wires are ws/ro (white/red) unless a colour is written on them. 10 parts and points, 11 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet. "→ track" is a reference box: the wire continues on that track, at the stretch its page link points to.

  • guess: the component label is not right at the symbol; the part was assigned by position.
64 · Headlights with High Intensity Gas Discharge (HID) "Bi-Xenon" lamps, Cornering Light and Automatic Headlight Beam B7 · 5 stretches

Diagram 64 page · joined to other diagrams at J431/18

Page 468manual · Level Control System Sensors

TrackWireFromToNotes
25ws/ro 0.35 mm²splice B229→ track 53 (p. 470)
25ws/ro 0.35 mm²J431 18splice B229
26ws/ro 0.35 mm²splice B229→ track 30 (p. 469)

Page 469manual · Left High-intensity Gas Discharge Lamp

TrackWireFromToNotes
30ws/ro → gn/gr 0.35 mm²→ track 26 (p. 468)V318 1

Page 470manual · Right High-intensity Gas Discharge Lamp

TrackWireFromToNotes
53ws/ro 0.35 mm²→ track 25 (p. 468)V319 1
111 · Can-Bus wiring B7 · 3 stretches

Diagram 111 page · joined to other diagrams at J431/18

Page 711manual · Headlamp Range Control Module, Steering Column Electronic Systems Control Module

TrackWireFromToNotes
18ws/ro 0.35 mm²V318 1guesssplice B229
20ws/ro 0.35 mm²V319 1guesssplice B229
22ws/ro 0.35 mm²J431 18splice B229

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.