Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

V192 · Brake System Vacuum Pump

Name
Brake System Vacuum Pump
Type
motor
Models
B6 and B7
Diagrams
5

Location

Wired into the right front wiring harnessinferred from wiring · 3 of 3 named splices on its wires

Other location statements (2)
  • Its wires run through T10 (Connector station on E-Box)inferred from wiring
  • Shown in the manual's location figures: Brake System Vacuum Pump Assembly Overview; 3.0L AVK and BGN; 4.2L BNSmanual figure p. 1179, p. 1214, p. 1244

Area: Wheels / suspension / brakes

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Sensors & Power

PinWireFunctionConnects toModelsSheets
1
br 1.5 mm²
Ground (terminal 31) at 12 (In engine compartment, left)stated
Ground (terminal 31) at 18 (On engine block), 12 (In engine compartment, left)stated
G266/2/31, J623/1, J623/2, J623/4, J624/36, N36/--, V274/1, V51/2, V101/1
via 18, 83, 85, 121, 131
B6 and B7108 604 801 875 +1
2
ro/bl 1.5 mm²
ro/gn
J569 Brake Booster Relay: relay switched output (87) to V192 Brake System Vacuum Pumpderived
J569/8/87, J569/5/87B6 and B7108 604 801 875 +1

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.