Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

V378 · Driver's Seat/Backrest Inflation Adjustment Valve Block

Name
Driver's Seat/Backrest Inflation Adjustment Valve Block
Type
motor
Models
B7 only
Diagrams
1

Location

In the driver's doorinferred from name

Area: Driver's door

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Power

PinWireFunctionConnects toModelsSheets
1
ro/ge 0.5 mm²
not statedJ797/4B7 only731
2
sw 0.5 mm²
not statedJ798/9B7 only731
3
br 0.5 mm²
Ground (terminal 31)stated
N209/3, V152/1
via 95, 413
B7 only731
4
gn/ge 0.5 mm²
not statedJ795/4B7 only731
5
gr 0.5 mm²
not statedJ796/9B7 only731

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.