Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

N198 · Center Rear Safety Belt Tensioner Igniter

Name
Center Rear Safety Belt Tensioner Igniter
Type
solenoid / valve / coil
Models
B6 and B7
Diagrams
3

Location

Its connector T2ac is described as: passenger compartment rear centersheet legend

Other location statements (1)
  • Shown in the manual's location figures: Seat Belt Tensionersmanual figure p. 1188

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

T2ac · 2-Pin Connector, yellow, passenger compartment rear center likely Module links

T2ac · 2-Pin Connector, yellow, passenger compartment rear center · diagrams 54, 105

Pin positions schematic: check the numbers moulded on the housing

2 positions (sheet legend), pin 1 top left, then in number order. The manual does not give the housing shape, its keying or how the pins sit in rows. Housing colour: yellow sheet legend. A dashed cell is a position with no wire in the extracted sheets: that does not mean it is empty in the car. Tap a pin for its function, far ends and wire.

Dimmed: pins drawn only in diagrams that do not apply to the car set in “My car”.

Tap a pin for what it does and where its wire goes.

T2ac pin 1

Colour
bl 0.5 mm²
Function
not stated
Far ends
J234/30
Wire
Wire between J234 and N198
Diagrams
54, 105

Row in the pin table

T2ac pin 2

Colour
gr 0.5 mm²
Function
not stated
Far ends
J234/29
Wire
Wire between J234 and N198
Diagrams
54, 105

Row in the pin table

PinWireFunctionConnects toModelsSheets
1
bl 0.5 mm²
not statedJ234/30B7 only411 639
2
gr 0.5 mm²
not statedJ234/29B7 only411 639

Pins printed without a connector code likely Module links

PinWireFunctionConnects toModelsSheets
1/+
bl 0.5 mm²
not statedJ234/57B6 only920
2/--
gr 0.5 mm²
not statedJ234/58B6 only920

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.