T2ac · Connector
Descriptions
| Description | Location | Diagrams |
|---|---|---|
| 2-Pin Connector, yellow, passenger compartment rear center On N198 Center Rear Safety Belt Tensioner Igniter | Passenger compartment rear centersheet legend | 54, 105 |
Pin face
Pin positions schematic: check the numbers moulded on the housing
2 positions (sheet legend), pin 1 top left, then in number order. The manual does not give the housing shape, its keying or how the pins sit in rows. Housing colour: yellow sheet legend. A dashed cell is a position with no wire in the extracted sheets: that does not mean it is empty in the car. Tap a pin for its function, far ends and wire.
Dimmed: pins drawn only in diagrams that do not apply to the car set in “My car”.
Tap a pin for what it does and where its wire goes.
T2ac pin 1
- Part
N198Center Rear Safety Belt Tensioner Igniter- Colour
bl0.5 mm²- Function
- not stated
- Far ends
J234/30- Wire
- Wire between J234 and N198
- Diagrams
- 54, 105
T2ac pin 2
- Part
N198Center Rear Safety Belt Tensioner Igniter- Colour
gr0.5 mm²- Function
- not stated
- Far ends
J234/29- Wire
- Wire between J234 and N198
- Diagrams
- 54, 105
Pins drawn on this connector code
Pins of components that the manual prints as T2ac/n. Because codes are reused, check the diagram column against the description above.
| Part | Pin | Wire | Function | Diagrams |
|---|---|---|---|---|
N198 | 1 | bl | N198 Center Rear Safety Belt Tensioner Igniter — line to J234 Airbag Control Module 30 | 54, 105 |
N198 | 2 | gr | N198 Center Rear Safety Belt Tensioner Igniter — line to J234 Airbag Control Module 29 | 54, 105 |