Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

J434 · Locking relay for starter (clutch pedal switch)

Name
Locking relay for starter (clutch pedal switch)
Type
control module / relay
Models
B6 and B7
Diagrams
8

Location

Relay carrier E-Box, engine codes BHF from 2006 MY, position 1.2 — In electronics box (E-box), plenum chambermanual text Manual pages 1109 · engine codes BHF from 2006 MY

Other location statements (2)
  • Wired into the engine compartment wiring harnessinferred from wiring
  • Its wires run through T17e (Connector station on E-Box)inferred from wiring

Area: Electronics box (plenum chamber)

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Switches

PinWireFunctionConnects toModelsSheets
1
gr/ws 0.35 mm²
not statedF194/2B6 and B798 378 533 865 +1
1
gr/br 0.35 mm²
gr/ws
not statedF194/2B6 only118
2
ro/sw 1.0 mm²
Starter control (terminal 50)stated
D/5/50b, J434/3
via A41, D97
B6 and B798 118 378 533 +2
3
ro/sw 2.5 mm²
Starter control (terminal 50)stated
D/5/50b, J434/2
via A41, D97
B6 and B798 118 378 533 +2
5
ro/sw 2.5 mm²
not statedB/50, F194/50B6 and B798 118 378 533 +2

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.