Wire at J434
Net neae11cd5 · one diagram
- Function
- J434 Starter Lock/Clutch Pedal Switch Relay pin 5 — other end not resolvedendpoints onlyBasis: only one part found on this net
- Wire
ro/sw- Models
- B7 only · Manual
- Drawn in
- 1 diagram, 1 stretch
- Checked
- Not checked by hand. Extracted from the manual automatically.
1 unresolved end
What is on this wire
Parts (1)
J434pin5Locking relay for starter (clutch pedal switch)
Where these parts are
| Part | Location |
|---|---|
J434 | Relay carrier E-Box, engine codes BHF from 2006 MY, position 1.2 — In electronics box (E-box), plenum chambermanual text p. 1109 |
Drawing
Wires are ro/sw (red/black) unless a colour is written on them. 2 parts and points, 1 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
85 · Starter Lock/Clutch Pedal Switch Relay B7 · 1 stretch
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.