Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

J344 · Control Module for High intensity gas discharge lamp

Name
Control Module for High intensity gas discharge lamp
Type
control module / relay
Models
B6 and B7
Diagrams
5

Location

Wired into the right headlamp wiring harnessinferred from wiring · 2 of 3 named splices on its wires

Other location statements (1)
  • Its wires run through T17c (Connector station - right A-pillar)inferred from wiring

Area: Front end

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Lighting

PinWireFunctionConnects toModelsSheets
1
gr/ge 0.5 mm²
not statedJ431/15B7 only463
4
gr/sw 0.5 mm²
not statedJ431/20B7 only463
4
gr/li 0.5 mm²
sw/li
Fused supply from S10 (5 A, terminal 15)derived
J431/23, S10/10aB7 only470
14/31
br 0.35 mm²
Ground (terminal 31) at 43 (On right lower A-pillar)stated
J344/5/31, L175/7/31
via 43, 176
B7 only470
5/31
br 2.5 mm²
Ground (terminal 31) at 43 (On right lower A-pillar)stated
L175/7/31, J344/14/31
via 43, 176
B7 only463 470
6/56b
ge/ws 1.0 mm²
Low beam (terminal 56b)derived
J519/22B7 only463 470

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.