Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

J219 · Back-Up Light Relay

Name
Back-Up Light Relay
Type
control module / relay
Models
B6 only
Diagrams
1

Location

Wired into the engine compartment wiring harnessinferred from wiring · 2 of 3 named splices on its wires

Area: Engine compartment

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Power & Module links

PinWireFunctionConnects toModelsSheets
2
br/ge 0.5 mm²
not statedJ217/8B6 only380
1/15
sw/bl 0.5 mm²
Ignition-switched positive, fused (terminal 15a), fuse 231, fused by S231 (15 A, terminal 15)derived
J207/1/15, J217/9, J219/3/15, N110/1, S231/31a
via A70, D51
B6 only380
3/15
sw/bl 1.0 mm²
Ignition-switched positive, fused (terminal 15a), fuse 231, fused by S231 (15 A, terminal 15)derived
J207/1/15, J217/9, J219/1/15, N110/1, S231/31a
via A70, D51
B6 only380
5/RF
bl/ro 1.0 mm²
Reversing lights (RF)stated
via A87
B6 only380

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.