Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

J207 · Starting Interlock Relay

Name
Starting Interlock Relay
Type
control module / relay
Models
B6 and B7
Diagrams
3

Location

Relay carrier E-Box, engine codes BPG, BWT from 2006 MY, position 1.2 (blue socket) — In electronics box (E-box), plenum chambermanual text Manual pages 1108 · engine codes BPG, BWT from 2006 MY

Other location statements (4)
  • Relay carrier E-Box, engine codes BHF from 2006 MY, position 1.2 (blue socket) — In electronics box (E-box), plenum chambermanual text p. 1109
  • On the relay carrier in the E-box plenum chambermanual text p. 1308
  • Wired into the engine compartment wiring harnessinferred from wiring
  • Its wires run through T4x (Near battery)inferred from wiring

Area: Electronics box (plenum chamber)

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links

PinWireFunctionConnects toModelsSheets
1/15
sw/bl 0.5 mm²
Ignition-switched positive, fused (terminal 15a), fuse 231, fused by S231 (15 A, terminal 15)derived
J217/9, J219/1/15, J219/3/15, N110/1, S231/31a
via A70, D51
B6 only380
1/50Z
br/ge 0.5 mm²
br/ws
not statedJ217/10B7 only535
1/P/N
br/ws 0.35 mm²
not statedJ217/4, J623/11B7 only541
2/50Z
br/ge 0.5 mm²
gr
not statedJ217/10B6 only380
2/50Z
ro/sw 1.0 mm²
Starter control (terminal 50)stated
D/5/50b, J207/3/50Z
via D97
B7 only541
2/P/N
sw/bl 0.35 mm²
Ignition-switched positive, fused (terminal 15a), fuse 231, fused by S231 (15 A, terminal 15)stated
G70/3, J217/9, N110/2, S231/31a
via A70, D51
B7 only535
3/50Z
ro/sw 2.5 mm²
Starter control (terminal 50)stated
D/5/50b, J207/2/50Z
via D97
B6 and B7380 535 541
5/50A
ro/sw 2.5 mm²
Starter control (terminal 50)stated
J623/23, J623/50, J623/35, J623/86
via U1, D97
B6 and B7380 535 541
5/50A
ro/bl 2.5 mm²
ro/sw
Starter control (terminal 50)stated
J623/23, J623/50, J623/35, J623/86
via U1, D97
B7 only535 541
5/50A
sw/ro 2.5 mm²
Starter control (terminal 50)stated
J623/23, J623/50
via D97
B7 only535
5/50A
bl/sw 2.5 mm²
ro/sw
Starter control (terminal 50)stated
J623/35, J623/86
via U1
B7 only541

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.