Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G284 · Front Passenger's Front Airbag Crash Sensor

Name
Front Passenger's Front Airbag Crash Sensor
Type
sensor
Models
B6 and B7
Diagrams
3

Location

Wired into the main wiring harnessinferred from wiring · 2 of 3 named splices on its wires

Other location statements (2)
  • Its wires run through T17c (Connector station - right A-pillar)inferred from wiring
  • Shown in the manual's location figures: Airbag Component Location; Airbag Crash Sensorsmanual figure p. 1182, p. 1184

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links

PinWireFunctionConnects toModelsSheets
1
li 0.35 mm²
not statedJ234/67B7 only412
1
gr 0.35 mm²
li
not statedJ234/67B7 only640
1
ro 0.35 mm²
Ground (terminal 31)stated
via 109
B6 only921
2
ro 0.35 mm²
Sensor groundstated
J234/41
via 411
B7 only412
2
bl 0.35 mm²
ro
Sensor groundstated
J234/41
via 411
B7 only640
2
li 0.35 mm²
not statedJ234/82B6 only921

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.