Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Sensor ground

Net n52dab5ff · joined across diagrams

Function
Sensor groundstated
Basis: ground connection 411
Wire
roswbl
Models
B7 only
Drawn in
2 diagrams, 6 stretches
Checked
Not checked by hand. Extracted from the manual automatically.

1 join between diagrams2 guessed components

What is on this wire

Parts (2)

  • G284pin 2guessFront Passenger's Front Airbag Crash Sensor
  • J234pin 41Airbag Control Module

Grounds (1)

  • 411Sensor Ground Connection 2 (in main wiring harness)

Inline connectors (2)

  • T17cpin 517-Pin Connector, red, connector station A-pillar, right
  • T17cpin 617-Pin Connector, red, connector station A-pillar, right

Where these parts are

PartLocation
G284Wired into the main wiring harnessinferred from wiring
J234Below centre console, in front of handbrake levermanual text p. 1125
411Splice inside the main wiring harnesssheet legend
T17cOn lower right A-pillar, behind trimmanual text p. 1099

Drawing

Wires are ro (red) unless a colour is written on them. 10 parts and points, 10 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.

  • guess: the component label is not right at the symbol; the part was assigned by position.
54 · Airbags and Safety Belt Tensioners B7 · 3 stretches

Diagram 54 page · joined to other diagrams at J234/41

Page 412manual · Driver and Front Passenger Front Airbag Crash Sensors, Instrument Cluster Control Module

TrackWireFromToNotes
103ro 0.35 mm²J234 41ground 411
104sw 0.35 mm²jointground 411
via T17c/6
105ro 0.35 mm²G284 2guessground 411
via T17c/5
105 · Airbags and Safety Belt Tensioners B7 · 3 stretches

Diagram 105 page · joined to other diagrams at J234/41

Page 640manual · Front Airbag Crash Sensor, Instrument Cluster Control Module

TrackWireFromToNotes
103ro 0.35 mm²J234 41ground 411
104sw 0.35 mm²jointground 411
via T17c/6
105ro → bl 0.35 mm²G284 2guessground 411
via T17c/5
marked **

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.