Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G185 · Sender -2- for accelerator pedal position

Name
Sender -2- for accelerator pedal position
Type
sensor
Models
B6 and B7
Diagrams
10

Location

In accelerator pedal modulemanual text Manual pages 1226 · 3.2L BKH

Other location statements (2)
  • Part of Accelerator Pedal Modulemanual text p. 1272
  • Its wires run through T17e (Connector station on E-Box)inferred from wiring

Area: Instrument panel

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links

PinWireFunctionConnects toModelsSheets
1
br/gn 0.35 mm²
not statedJ220/72, J623/58, J623/72B6 and B7109 125 145 526 +6
5
gr/ge 0.35 mm²
or
not statedJ220/33, J623/56, J623/33, J623/78B6 and B7109 125 145 526 +6
6
br 0.35 mm²
not statedJ220/34, J623/57, J623/34, J623/79B6 and B7109 125 145 526 +6

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.