Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Wire between G185 and J623 (+1)

Net n9a2bd7be · joined across diagrams

Function
G185 Accelerator Pedal Position Sensor 2 — line to J623 Engine Control Module T94/56endpoints only
Basis: named after the two parts it connects
Wire
gr/geor
Models
B7 only · 4.2 RS4
Drawn in
2 diagrams, 2 stretches
Checked
Not checked by hand. Extracted from the manual automatically.

1 join between diagrams, 1 not certain2 guessed components

What is on this wire

Parts (2)

  • G185pin 5guessSender -2- for accelerator pedal position
  • J623pin T94/56Engine Control Module (ECM)

Inline connectors (1)

  • T17epin 517-Pin Connector, white, connector station E-box, plenum chamber

Where these parts are

PartLocation
G185In accelerator pedal modulemanual text p. 1226
J623Under the plenum chamber covermanual text p. 1204
T17eIn electronics box, plenum chambermanual text p. 1101 p. 1102

Drawing

Wires are gr/ge (grey/yellow) unless a colour is written on them. 4 parts and points, 4 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.

  • guess: the component label is not right at the symbol; the part was assigned by position.
102 · 4,2 l - FSI - Injection Engine (309 kW - Motronic - cylinder 8) engine code BNS B7 · 1 stretch

Diagram 102 page · joined to other diagrams at G185/5medium

Page 607manual · Engine Control Module (ECM), Brake Light Switch, Accelerator Pedal Position Sensor, Throttle Valve Control Module

TrackWireFromToNotes
92gr/ge 0.35 mm²G185 5guessJ623 T94/56
via T17e/5
128 · 4,2 l - FSI - Injection Engine (309 kW - Motronic - cylinder 8) engine code BNS B7 · 1 stretch

Diagram 128 page · joined to other diagrams at G185/5medium

Page 804manual · Engine Control Module (ECM), Brake Light Switch, Accelerator Pedal Position Sensor, Throttle Valve Control Module

TrackWireFromToNotes
92or → gr/ge 0.35 mm²G185 5guessJ623 T94/56
via T17e/5

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.