Wire between E590 and J720 (+1)
Net nb79a98f4 · one diagram
- Function
- E590 Front Passenger's Backrest Bolster Inflation Adjustment Button — line to J720 Front Passenger's Seat Adjustment Control Module T32k/21endpoints onlyBasis: named after the two parts it connects
- Wire
br/swgr- Models
- B7 only
- Drawn in
- 1 diagram, 1 stretch
- Checked
- Not checked by hand. Extracted from the manual automatically.
1 guessed component
What is on this wire
Parts (2)
Inline connectors (1)
T2alpin2Double Connector, black, behind panel on seat in front area
Where these parts are
| Part | Location |
|---|---|
E590 | In or under the front passenger's seatinferred from name |
J720 | In or under the front passenger's seatinferred from name |
T2al | Behind panel on seat in front areasheet legend |
Drawing
Wires are br/sw (brown/black) unless a colour is written on them. 3 parts and points, 2 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
- guess: the component label is not right at the symbol; the part was assigned by position.
116 · Power seats with lumbar support and electrically seat heating B7 · 1 stretch
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.