E590 · Front Passenger's Backrest Bolster Inflation Adjustment B…
- Name
- Front Passenger's Backrest Bolster Inflation Adjustment Button
- Type
- switch
- Models
- B7 only
- Diagrams
- 1
Location
In or under the front passenger's seatinferred from name
Other location statements (1)
- Its wires run through T2al (Behind panel on seat in front area)inferred from wiring
Area: Seats
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
Pins printed without a connector code likely Switches & Module links
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
1 | gr 0.5 mm²ro | not stated | E177/4, E588/1, J720/14, J720/8via M18 | B7 only | 733 |
2 | br/sw 0.5 mm²gr | not stated | J720/21 | B7 only | 733 |
Diagrams
- 116 · Power seats with lumbar support and electrically seat heating B7 · From 2006 m.y.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.