Wire between G202 and J104 (+1)
Net nb33cbfd2 · joined across diagrams
- Function
- G202 Sender for Rotation Rate — line to J104 ABS Control Module 41endpoints onlyBasis: named after the two parts it connects
- Wire
ws- Models
- B6 only
- Drawn in
- 2 diagrams, 2 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
1 join between diagrams2 guessed components
What is on this wire
Parts (2)
Inline connectors (1)
T17bpin1017-Pin Connector, green, connector station A-pillar, left
Where these parts are
| Part | Location |
|---|---|
G202 | Components integrated in one housingmanual text p. 1177 |
J104 | In engine compartment, on hydraulic unit, front leftmanual text p. 1123 |
T17b | On lower left A-pillar, behind trimmanual text p. 1100 p. 1101 |
Drawing
Wires are ws (white) unless a colour is written on them. 4 parts and points, 4 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
- guess: the component label is not right at the symbol; the part was assigned by position.
14 · ABS, with ESP (4.2 l - Injection Engine) B6 · 1 stretch
Diagram 14 page · joined to other diagrams at J104/41
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.