Wire between J217 and J226
Net na40a0664 · joined across diagrams
- Function
- J226 Park/Neutral Position Relay ↔ J217 4endpoints onlyBasis: named after the two parts it connects
- Wire
br/ws- Models
- B6 only · multitronic
- Drawn in
- 2 diagrams, 2 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
1 join between diagrams, 1 not certain2 guessed components
What is on this wire
Parts (2)
Where these parts are
| Part | Location |
|---|---|
J217 | In electronics box, plenum chambermanual text p. 1122 |
J226 | On the relay carrier in the E-box plenum chambermanual text p. 1308 |
Drawing
Wires are br/ws (brown/white) unless a colour is written on them. 2 parts and points, 1 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
- guess: the component label is not right at the symbol; the part was assigned by position.
25 · Constantly variable automatic transmission, multitronic® 01J B6 · 1 stretch
Diagram 25 page · joined to other diagrams at J226/1/P/Nmedium
320 · Constantly variable automatic transmission, multitronic® 01J B6 · 1 stretch
Diagram 320 page · joined to other diagrams at J226/1/P/Nmedium
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.