Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

J226 · Park/Neutral Position (PNP) Relay

Name
Park/Neutral Position (PNP) Relay
Type
control module / relay
Models
B6 only
Diagrams
3

Location

On the relay carrier in the E-box plenum chambermanual text Manual pages 1308

Other location statements (2)
  • Wired into the engine compartment wiring harnessinferred from wiring
  • Its wires run through T17d (Connector station on E-Box)inferred from wiring

Area: Electronics box (plenum chamber)

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links

PinWireFunctionConnects toModelsSheets
1/P/N
br/ge 0.5 mm²
not statedJ217/10B6 only89
1/P/N
br/ws 0.35 mm²
not statedJ217/4B6 only240 1014
2/50Z
ro/sw 2.5 mm²
Starter control (terminal 50)stated
D/5/50bB6 only89 240 1014
5/RF
bl/ro 1.0 mm²
Reversing lights (RF)stated
via A87
B6 only89 240 1014
6/B
br/ge 0.5 mm²
or
not statedJ217/8, J217/7, J217/3B6 only89 240 1014
7/15
sw/bl 1.0 mm²
Ignition-switched positive, fused (terminal 15a), fuse 231, fused by S231 (15 A, terminal 15)derived
S231/31a, J217/9, N110/1, J217/10, J217/8
via A70, D51
B6 only89 240 1014
8/50A
ro/sw 2.5 mm²
not statedB6 only89 240 1014

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.