Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Wire between F38 and J285 (+2)

Net n6cc9c528 · joined across diagrams

Function
F38 Ambient Temperature Switch — line to J285 Control module with indicator unit in instrument panel insert T32/21endpoints only
Basis: named after the two parts it connects
Wire
ge/gr
Models
B6 only
Drawn in
5 diagrams, 5 stretches
Checked
Not checked by hand. Extracted from the manual automatically.

4 joins between diagrams

What is on this wire

Parts (2)

  • F38pin 2Ambient Temperature Switch
  • J285pin T32/21Control module with indicator unit in instrument panel insert

Inline connectors (3)

  • T10dpin ?10-Pin Connector, grey, connector station A-pillar, left
  • T10dpin 1010-Pin Connector, grey, connector station A-pillar, left
  • T14pin 414-Pin Connector, black, in engine compartment, left

Where these parts are

PartLocation
F38Front end, behind the bumperinferred from name
J285Behind display unitmanual text p. 1125
T10dOn lower left A-pillar, behind trimmanual text p. 1100 p. 1101
T14In engine compartment, leftsheet legend

Drawing

Wires are ge/gr (yellow/grey) unless a colour is written on them. 12 parts and points, 15 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.

3 · Basic Equipment Lowline B6 · 1 stretch

Diagram 3 page · joined to other diagrams at J285/T32/21

Page 22manual · Control module with indicator unit in instrument panel insert, Engine Coolant Temperature (ECT) Sensor, Engine Coolant Level (ECL) Warning Switch, Sender for fuel gauge, Oil Level

TrackWireFromToNotes
233ge/gr 0.35 mm²J285 T32/21F38 2
4 · Basic Equipment Highline B6 · 1 stretch

Diagram 4 page · joined to other diagrams at J285/T32/21

Page 48manual · Control module with indicator unit in instrument panel insert, Engine Coolant Temperature (ECT) Sensor, Engine Coolant Level (ECL) Warning Switch, Sender for fuel gauge, Oil Level

TrackWireFromToNotes
233ge/gr 0.35 mm²J285 T32/21F38 2
via T10d, T14/4
18 · Basic Equipment Lowline B6 · 1 stretch

Diagram 18 page · joined to other diagrams at J285/T32/21

Page 191manual · Control module with indicator unit in instrument panel insert, Engine Coolant Temperature (ECT) Sensor, Engine Coolant Level (ECL) Warning Switch, Sender for fuel gauge, Oil Level

TrackWireFromToNotes
233ge/gr 0.35 mm²J285 T32/21F38 2
19 · Basic Equipment Highline B6 · 1 stretch

Diagram 19 page · joined to other diagrams at J285/T32/21

Page 217manual · Control module with indicator unit in instrument panel insert, Engine Coolant Temperature (ECT) Sensor, Engine Coolant Level (ECL) Warning Switch, Sender for fuel gauge, Oil Level

TrackWireFromToNotes
233ge/gr 0.35 mm²J285 T32/21F38 2
via T10d, T14/4
302 · Basic Equipment Highline B6 · 1 stretch

Diagram 302 page · joined to other diagrams at J285/T32/21

Page 855manual · Control module with indicator unit in instrument panel insert, Engine Coolant Temperature (ECT) Sensor, Engine Coolant Level (ECL) Warning Switch, Sender for fuel gauge, Oil Level

TrackWireFromToNotes
233ge/gr 0.35 mm²J285 T32/21F38 2

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.