Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Page 217 · Control module with indicator unit in instrument panel insert, Engine Coolant Temperature (ECT) Sensor, Engine Coolant Level (ECL) Warning Switch, Sender for fuel gauge, Oil Level

225226227228229230231232233234235236237238brown/red 0.22 / 0.35 mm²: J285 pin T32/1 to F77 pin 10.22 br/ro0.35 br/roT32/11brown/yellow 0.35 mm²: F77 pin 2 to ground 2690.35 br/ge2orange/green 0.22 mm²: track 75 (p. 206) to J285 pin T32/170.22 or/gn17brown/yellow 0.35 mm²: F77 pin 3 to splice 3270.35 br/ge3blue/yellow 0.35 mm²: J285 pin T32/2 to F77 pin 10.35 bl/ge0.35 bl/ge21brown/yellow 0.35 mm²: F66 pin 2 to splice 3272blue/brown 0.35 mm²: J285 pin T32/4 to G2 pin 10.35 bl/br0.35 bl/br41orange/brown 0.22 mm²: track 72 (p. 206) to J285 pin T32/180.22 or/br18brown/yellow 0.35 mm²: splice 327 to ground 2690.35 br/ge0.35 br/gelilac/black 0.35 mm²: J285 pin T32/3 to G pin 20.35 li/sw32brown/yellow 0.5 mm²: G pin 3 to ground 2690.5 br/ge3lilac/black 0.35 mm²: J285 pin T32/11 to G pin 20.35 li/sw112brown/yellow 0.5 mm²: G pin 3 to ground 2690.5 br/ge3yellow/grey 0.35 mm²: J285 pin T32/21 to F38 pin 20.35 ge/gr0.35 ge/gr0.35 ge/gr212red 0.22 mm²: track 34 (p. 203) to J285 pin T32/220.22 ro22brown/yellow 0.35 mm²: F38 pin 1 to ground 2690.35 br/ge0.35 br/ge0.35 br/ge1red/grey 0.35 mm²: J285 pin T32/23 to G266 pin 30.35 ro/gr0.35 ro/gr233black/red 1.0 / 0.5 mm²: track 217 (p. 216) to G266 pin 11.0 sw/ro0.5 sw/ro1brown 0.5 mm²: G266 pin 2 to ground 830.5 br2black 0.22 mm²: D2 pin 2 to J285 pin T32/300.22 sw230green 0.22 mm²: D2 pin 1 to J285 pin T32/310.22 gn131brown/yellow 0.22 mm²: J285 pin T32/32 to ground 2690.22 br/ge322692692692692692693273272692692692692692698383Inline connector T17 pin 9T17/9Inline connector T10dT10dInline connector T10a pin 9T10a/9Inline connector T10a pin 2T10a/2Inline connector T17 pin 10T17/10Inline connector T14 pin 4T14/4Inline connector T14 pin 3T14/3Inline connector T10dT10dInline connector T10 pin 7T10/7Inline connector T10 pin 9T10/9Inline connector T10 pin 6T10/6Continues at track 34, page 20334Continues at track 217, page 216217Continues at track 75, page 20675Continues at track 72, page 20672D2 · Induction Coil of Anti-theft ImmobilizerD2F77 · Windshield Washer Fluid Level Warning SwitchF77F66 · Engine Coolant Level (ECL) Warning SwitchF66G · Sender for fuel gaugeGG2 · Engine Coolant Temperature (ECT) SensorG2G169 · Fuel Level Sensor 2G169F38 · Ambient Temperature SwitchF38G266 · Oil Level Thermal SensorG266J285 · Control module with indicator unit in instrument panel insertJ285G1 · Fuel GaugeG1G3 · Engine Coolant Temperature (ECT) GaugeG3

Point at or tap a wire to see the whole circuit on this sheet; tap again to open it.

  • wire in its colours (ro/sw)
  • part guessed from its position
  • end not resolved
  • continues at that track
  • splice or ground point
  • inline connector
  • bold pin corrected by hand

Drawn by this site from the positions and wiring data extracted from the manual. Pinch, Ctrl+scroll or the buttons zoom; drag to move once zoomed.

What this drawing does not show:

  • what is inside a part: fuse elements, relay contacts, switches, bulbs, motors and the lines inside modules (a part is a box, or only its code);
  • the asterisks that mark variant wires (a wire tied to sedan or Avant says so when tapped, and is faded for the other body);
  • the shields of coaxial cables, and the sheet's notes and terminal names;
  • fuse ratings other than those the fuse list states for that code.
  • 2 of 33 gauge and colour labels, where there was no room on the wire: tap the wire for them.

8 ends corrected (see the corrections list). Manual page: p. 217