Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Wire between F77 and J285 (+1)

Net n6b054cd9 · joined across diagrams

Function
F77 Windshield Washer Fluid Level Warning Switch — line to J285 Control module with indicator unit in instrument panel insert T32/1endpoints only
Basis: named after the two parts it connects
Wire
br/ro
Models
B6 only
Drawn in
3 diagrams, 3 stretches
Checked
Not checked by hand. Extracted from the manual automatically.

2 joins between diagrams

What is on this wire

Parts (2)

  • F77pin 1, pin ?Windshield Washer Fluid Level Warning Switch
  • J285pin T32/1Control module with indicator unit in instrument panel insert

Inline connectors (1)

  • T17pin 917-Pin Connector, black, connector station A-pillar, left

Where these parts are

PartLocation
F77Front, at the washer fluid reservoirinferred from name
J285Behind display unitmanual text p. 1125
T17On lower left A-pillar, behind trimmanual text p. 1100 p. 1101

Drawing

Wires are br/ro (brown/red) unless a colour is written on them. 5 parts and points, 6 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.

4 · Basic Equipment Highline B6 · 1 stretch

Diagram 4 page · joined to other diagrams at J285/T32/1

Page 48manual · Control module with indicator unit in instrument panel insert, Engine Coolant Temperature (ECT) Sensor, Engine Coolant Level (ECL) Warning Switch, Sender for fuel gauge, Oil Level

TrackWireFromToNotes
225br/ro 0.22 / 0.35 mm²J285 T32/1F77 1
via T17/9
19 · Basic Equipment Highline B6 · 1 stretch

Diagram 19 page · joined to other diagrams at J285/T32/1

Page 217manual · Control module with indicator unit in instrument panel insert, Engine Coolant Temperature (ECT) Sensor, Engine Coolant Level (ECL) Warning Switch, Sender for fuel gauge, Oil Level

TrackWireFromToNotes
225br/ro 0.22 / 0.35 mm²J285 T32/1F77 1
via T17/9
302 · Basic Equipment Highline B6 · 1 stretch

Diagram 302 page · joined to other diagrams at J285/T32/1

Page 855manual · Control module with indicator unit in instrument panel insert, Engine Coolant Temperature (ECT) Sensor, Engine Coolant Level (ECL) Warning Switch, Sender for fuel gauge, Oil Level

TrackWireFromToNotes
225br/ro 0.22 / 0.5 mm²J285 T32/1F77 pin
via T17/9

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.