Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

T1h · Connector

Descriptions

DescriptionLocationDiagrams
1-Pin Connector, on Suppressor
On C24 Suppressor
On Suppressorsheet legend95

Pin face

T1h · 1-Pin Connector, on Suppressor · diagram 95

Pin positions schematic: check the numbers moulded on the housing

Pins printed with a label that is not a position number from 1 to 1: their place on the housing is not known.

1 positions (sheet legend), pin 1 top left, then in number order. The manual does not give the housing shape, its keying or how the pins sit in rows. A dashed cell is a position with no wire in the extracted sheets: that does not mean it is empty in the car. Tap a pin for its function, far ends and wire.

Dimmed: pins drawn only in diagrams that do not apply to the car set in “My car”.

Tap a pin for what it does and where its wire goes.

T1h pin 1

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T1h pin ?

Part
C24 Suppressor
Colour
sw/ro 0.35 mm²
Function
Starter control (terminal 50)stated
Far ends
C24, D/5/50b, J623/10
via D97
Wire
Starter control (terminal 50)
Diagrams
95

Row on C24’s page

Pins drawn on this connector code

Pins of components that the manual prints as T1h/n. Because codes are reused, check the diagram column against the description above.

PartPinWireFunctionDiagrams
C24?sw/roStarter control (terminal 50)95