J671 · Coolant Fan Control (FC) Control Module 2
- Name
- Coolant Fan Control (FC) Control Module 2
- Type
- control module / relay
- Models
- B6 and B7
- Diagrams
- 6
Location
Front end, at the radiatorinferred from name
Other location statements (2)
- Its wires run through T10d (Connector station - left A-pillar)inferred from wiring
- Shown in the manual's location figures: Cooling Fans and Cooling Pumpmanual figure p. 1266
Area: Front end
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
T2o · Double Connector, on Coolant FC (Fan Control) Control Module 2 likely Ground & Motors/actuators
Pin positions schematic: check the numbers moulded on the housing
2 positions (sheet legend), pin 1 top left, then in number order. The manual does not give the housing shape, its keying or how the pins sit in rows. A dashed cell is a position with no wire in the extracted sheets: that does not mean it is empty in the car. Tap a pin for its function, far ends and wire.
Dimmed: pins drawn only in diagrams that do not apply to the car set in “My car”.
Tap a pin for what it does and where its wire goes.
T2o pin 1
- Colour
br6.0 mm²- Function
- Ground (terminal 31) at 26 (On front apron)stated
- Far ends
- none foundvia
26 - Wire
- Ground (terminal 31) at 26 (On front apron)
Ground (terminal 31) at 26 (On front apron)
Ground (terminal 31) at 26 (On front apron) - Diagrams
- 13, 90, 103
T2o pin 2
- Colour
ro/bl6.0 mm²- Function
- Feed to fuse S214 (40 A, Radiator Afterrun Fuse 1))derivedFeed to fuse S42 (40/60 A, Coolant Fan Fuse)derived
- Far ends
S214/2,S42/2- Wire
- Feed to fuse S214 (40 A, Radiator Afterrun Fuse 1))
Feed to fuse S42 (40/60 A, Coolant Fan Fuse)
Feed to fuse S214 (40 A, Radiator Afterrun Fuse 1)) - Diagrams
- 13, 90, 103
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
1 | br 6.0 mm² | Ground (terminal 31) at 26 (On front apron)stated | via 26 | B6 and B7 | 155 564 625 |
2 | ro/bl 6.0 mm² | Feed to fuse S214 (40 A, Radiator Afterrun Fuse 1))derived Feed to fuse S42 (40/60 A, Coolant Fan Fuse)derived | S214/2, S42/2 | B6 and B7 | 155 564 625 |
T6n · 6-Pin Connector, on Coolant FC (Fan Control) Control Module 2 likely Module links & Motors/actuators
Pin positions schematic: check the numbers moulded on the housing
6 positions (sheet legend), pin 1 top left, then in number order. The manual does not give the housing shape, its keying or how the pins sit in rows. A dashed cell is a position with no wire in the extracted sheets: that does not mean it is empty in the car. Tap a pin for its function, far ends and wire.
Dimmed: pins drawn only in diagrams that do not apply to the car set in “My car”.
Tap a pin for what it does and where its wire goes.
T6n pin 1
- Colour
ro/gr0.5 mm²- Function
- Fused supply from S4 (5 A, terminal 87)derived
- Far ends
J293/1,S4/4a- Wire
- Fused supply from S4 (5 A, terminal 87)
Fused supply from S4 (5 A, terminal 87)
Fused supply from S4 (5 A, terminal 87) - Diagrams
- 12, 13, 89, 90, 102, 103
T6n pin 2
- Colour
ro/ge0.35 mm²- Function
- not stated
- Far ends
J623/104,J623/30,J220/104- Wire
- Wire between J220 and J293 (+3)
Wire between J623 and J671 (+2)
Wire between J623 and J671 (+2) - Diagrams
- 12, 89, 90, 102, 103
T6n pin 3
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T6n pin 4
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T6n pin 5
- Colour
ro/ws0.35 mm²- Function
- not stated
- Far ends
J220/66- Wire
- Wire between J220 and J293 (+4)
- Diagrams
- 13
T6n pin 6
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
1 | ro/gr 0.5 mm² | Fused supply from S4 (5 A, terminal 87)derived | J293/1, S4/4a | B6 and B7 | 136 155 551 564 +2 |
2 | ro/ge 0.35 mm² | not stated | J623/104, J623/30, J220/104 | B6 and B7 | 138 551 564 611 +1 |
5 | ro/ws 0.35 mm² | not stated | J220/66 | B6 only | 155 |
Pins printed without a connector code
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
+ | no colour | not stated | B6 and B7 | 155 564 625 | |
+ | or | not stated | B7 only | 564 | |
-- | no colour | not stated | B6 and B7 | 155 564 625 |
Diagrams
- 12 · 4.2 l - Injection Engine (253 kW - Motronic - 8 Cylinder) engine code BHF B6 · From 2003 m. y.
- 13 · Radiator fan control 700 W or 800 W (4.2 l - Injection Engine) B6 · From 2003 m. y.
- 89 · 4.2L - Injection Engine (253 kW - Motronic - 8 Cylinder) engine codes BBK, BHF B7 · From January 2005
- 90 · Radiator fan control 700 W or 800 W (4.2L - Injection Engine) B7 · From January 2005
- 102 · 4,2 l - FSI - Injection Engine (309 kW - Motronic - cylinder 8) engine code BNS B7 · From 2006 m. y.
- 103 · Radiator fan control 400 W, 700 W or 800 W (petrol engines) B7 · From 2006 m. y.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.