J530 · Garage Door Opener Control Module
- Name
- Garage Door Opener Control Module
- Type
- control module / relay
- Models
- B6 only
- Diagrams
- 2
Location
In the front bumper covermanual text Manual pages 1330
Other location statements (3)
- In a doorinferred from name
- Wired into the bumper wiring harnessinferred from wiring
- Its wires run through T10i (Connector station - left A-pillar)inferred from wiring
Area: Front end
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
Pins printed without a connector code likely Ground & Power
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
2 | gn/ws 0.35 mm² | not stated | B6 only | 280 1080 | |
3 | br/ws 0.35 mm² | Ground (terminal 31)stated | via 345 | B6 only | 280 1080 |
4 | sw/ro 0.35 mm² | Fused supply from S16 (5 A, terminal 15) to J530 Garage Door Opener Control Modulederived | S16/16a | B6 only | 280 1080 |
Diagrams
- 32 · Garage Door Opener - "Homelink" B6 · From 2004 m. y.
- 333 · Garage Door Opener - "Homelink" B6 · From 2002 m. y.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.