Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

J126 · Control module for fresh air blower

Name
Control module for fresh air blower
Type
control module / relay
Models
B6 and B7
Diagrams
3

Location

Behind glove box, in fresh air blower - V2manual text Manual pages 1124

Other location statements (2)
  • The fresh air blower control module -J126- is installed in the fresh air blower -V2-manual text p. 1173
  • Wired into the wiring harnessinferred from wiring

Area: Instrument panel

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Switches

PinWireFunctionConnects toModelsSheets
1
ge 0.5 mm²
not statedE87/D/6, J255/D/6B6 and B7295 423 980
2
sw/br 0.5 mm²
not statedE87/D/5, J255/D/5B6 and B7295 423 980
3
br 4.0 mm²
Ground (terminal 31) at 33 (Behind instrument panel, right)stated
via 238
B6 and B7295 423 980
4
ro/bl 4.0 mm²
Fused supply from S225 (30 A, terminal 30) to J126 Control module for fresh air blowerderived
S225/25aB6 and B7295 423 980
6
ro/bl 2.5 mm²
not statedC20/1B6 and B7295 423 980

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.