Ground (terminal 31)
Net nfd8c63eb · joined across diagrams
- Function
- Ground (terminal 31)statedBasis: ground connection 261
- Wire
br- Models
- B6 only
- Drawn in
- 5 diagrams, 5 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
4 joins between diagrams
What is on this wire
Parts (1)
F34pin2Brake Fluid Level Warning Switch
Grounds (1)
261Ground connection, in wiring harness heated spray jet
Where these parts are
| Part | Location |
|---|---|
F34 | Wired into the wiring harnessinferred from wiring |
261 | Splice inside the wiring harnesssheet legend |
Drawing
Wires are br (brown) unless a colour is written on them. 6 parts and points, 5 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
3 · Basic Equipment Lowline B6 · 1 stretch
Diagram 3 page · joined to other diagrams at F34/2
4 · Basic Equipment Highline B6 · 1 stretch
Diagram 4 page · joined to other diagrams at F34/2
18 · Basic Equipment Lowline B6 · 1 stretch
Diagram 18 page · joined to other diagrams at F34/2
19 · Basic Equipment Highline B6 · 1 stretch
Diagram 19 page · joined to other diagrams at F34/2
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.