Shield ground
Net nfa168e56 · joined across diagrams
- Function
- Shield groundstatedBasis: ground connection 200
- Wire
sw- Models
- B6 only · 1.8T
- Drawn in
- 2 diagrams, 6 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
1 join between diagrams
What is on this wire
Parts (1)
J220pin32Motronic Engine Control Module (ECM)
Splices (1)
200Ground connection (shielding), in engine compartment wiring harness
Where these parts are
| Part | Location |
|---|---|
J220 | In electronics box, plenum chambermanual text p. 1122 |
200 | Splice inside the engine compartment wiring harnesssheet legend |
Drawing
Wires are sw (black) unless a colour is written on them. 7 parts and points, 6 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
10 · 1.8 l - Injection Engine (125 kW - Motronic - 4 Cylinder) engine codes AMB B6 · 3 stretches
Diagram 10 page · joined to other diagrams at J220/32
304 · 1.8 l - Injection Engine (125 kW - Motronic - 4 Cylinder) engine codes AMB B6 · 3 stretches
Diagram 304 page · joined to other diagrams at J220/32
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.