Wire at J503
Net nf679db93 · one diagram
- Function
- J503 Radio/Navigation Display Control Module pin T12m/4 (internal / single-part net)endpoints onlyBasis: only one part found on this net
- Wire
sw- Models
- B7 only
- Drawn in
- 1 diagram, 3 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
2 stretches to check1 unresolved end
What is on this wire
Parts (1)
J503pinT12m/4Radio/Navigation Display Control Module
Where these parts are
| Part | Location |
|---|---|
J503 | At the top of the center consolemanual text p. 1285 p. 1287 |
Drawing
Wires are sw (black) unless a colour is written on them. 4 parts and points, 3 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
- check: the extraction marked the stretch for a look at the sheet.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.