Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Ground (terminal 31)

Net nf55f832d · one diagram

Function
Ground (terminal 31)stated
Basis: ground connection 109
Wire
sw
Models
B6 only
Drawn in
1 diagram, 1 stretch
Checked
Not checked by hand. Extracted from the manual automatically.

What is on this wire

Grounds (1)

  • 109Ground connection, in airbag wiring harness

Inline connectors (1)

  • T17apin ?17-Pin Connector, red, connector station A-pillar, left

Where these parts are

PartLocation
109Splice inside the airbag wiring harnesssheet legend
T17aOn lower left A-pillar, behind trimmanual text p. 1100 p. 1101

Drawing

Wires are sw (black) unless a colour is written on them. 3 parts and points, 2 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.

307 · Airbag for driver, passenger with seat belt tensioner and side Airbag B6 · 1 stretch

Diagram 307 page

Page 921manual · Drivers and Passengers Front airbag Crash Sensor, Control module with indicator unit in instrument panel insert

TrackWireFromToNotes
85sw 0.35 mm²jointground 109
via T17a

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.