Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Ground (terminal 31)

Net ndbda25c3 · one diagram

Function
Ground (terminal 31)stated
Basis: ground connection 109
Wire
br
Models
B6 only
Drawn in
1 diagram, 1 stretch
Checked
Not checked by hand. Extracted from the manual automatically.

What is on this wire

Parts (1)

  • J234pin 66Airbag Control Module

Grounds (1)

  • 109Ground connection, in airbag wiring harness

Where these parts are

PartLocation
J234Below centre console, in front of handbrake levermanual text p. 1125
109Splice inside the airbag wiring harnesssheet legend

Drawing

Wires are br (brown) unless a colour is written on them. 2 parts and points, 1 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.

307 · Airbag for driver, passenger with seat belt tensioner and side Airbag B6 · 1 stretch

Diagram 307 page

Page 915manual · Airbag for driver's side and passenger side, seat belt tensioner, igniter

TrackWireFromToNotes
2br 0.5 mm²J234 66ground 109

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.