Starter control (terminal 50)
Net ndb0a4ad4-441.20 · joined across diagrams
- Function
- Starter control (terminal 50)derivedBasis: terminal marking 50 printed at 2 pins on this net
- Wire
bl- Models
- B7 only
- Drawn in
- 2 diagrams, 4 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
1 join between diagrams
What is on this wire
Supply (2)
Fuses, the battery, alternator, ignition switch, and pins marked with a supply terminal (30, 15, 75, X, 50, 87).
Where these parts are
| Part | Location |
|---|---|
D | On the steering column, electrical part of the ignition lockoutside reference |
J527 | At steering columnmanual text p. 1124 |
Drawing
Wires are bl (blue) unless a colour is written on them. 6 parts and points, 4 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
62 · Standard Equipment B7 · 2 stretches
Diagram 62 page · joined to other diagrams at D/1/50
109 · Standard Equipment B7 · 2 stretches
Diagram 109 page · joined to other diagrams at D/1/50
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.