Ground (terminal 31)
Net nd1f28592 · one diagram
- Function
- Ground (terminal 31)statedBasis: ground connection 109
- Wire
br- Models
- B7 only
- Drawn in
- 1 diagram, 2 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
What is on this wire
Grounds (1)
109Ground connection, in airbag wiring harness
Inline connectors (2)
Where these parts are
| Part | Location |
|---|---|
109 | Splice inside the airbag wiring harnesssheet legend |
T4i | Connector station passenger compartment, rear leftsheet legend |
T4j | Connector station passenger compartment, rear rightsheet legend |
Drawing
Wires are br (brown) unless a colour is written on them. 5 parts and points, 4 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
105 · Airbags and Safety Belt Tensioners B7 · 2 stretches
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.