Sensor ground
Net nd0cbb312 · one diagram
- Function
- Sensor groundstatedBasis: ground connection 104
- Wire
gewsws/br- Models
- B7 only · 4.2 S4
- Drawn in
- 1 diagram, 5 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
What is on this wire
Parts (1)
J623pinT121/99Engine Control Module (ECM)
Grounds (1)
104Ground connection, in right front wiring harness - sensor Grounds -
Inline connectors (4)
Where these parts are
| Part | Location |
|---|---|
J623 | Under the plenum chamber covermanual text p. 1204 |
104 | Splice inside the right front wiring harnesssheet legend |
T3b | On engine blocksheet legend |
T3e | On engine blocksheet legend |
T3f | On engine blocksheet legend |
T3g | On engine blocksheet legend |
Drawing
Wires are ge (yellow) unless a colour is written on them. 11 parts and points, 9 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
89 · 4.2L - Injection Engine (253 kW - Motronic - 8 Cylinder) engine codes BBK, BHF B7 · 5 stretches
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.