Wire between E588 and J720 (+1)
Net nc6071cec · one diagram
- Function
- E588 Front Passenger's Seat Bolster Inflation Adjustment Button — line to J720 Front Passenger's Seat Adjustment Control Module T32k/18endpoints onlyBasis: named after the two parts it connects
- Wire
br/wsgr- Models
- B7 only
- Drawn in
- 1 diagram, 1 stretch
- Checked
- Not checked by hand. Extracted from the manual automatically.
1 guessed component
What is on this wire
Parts (2)
Inline connectors (1)
T2akpin2Double Connector, black, behind panel on seat in front area
Where these parts are
| Part | Location |
|---|---|
E588 | In or under the front passenger's seatinferred from name |
J720 | In or under the front passenger's seatinferred from name |
T2ak | Behind panel on seat in front areasheet legend |
Drawing
Wires are br/ws (brown/white) unless a colour is written on them. 3 parts and points, 2 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
- guess: the component label is not right at the symbol; the part was assigned by position.
116 · Power seats with lumbar support and electrically seat heating B7 · 1 stretch
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.