Wire between F189 and J217 (+1)
Net nbdc8ca9b · joined across diagrams
- Function
- F189 Tiptronic Switch — line to J217 Transmission Control Module 1endpoints onlyBasis: named after the two parts it connects
- Wire
gn/li- Models
- B6 only · 6-speed Tiptronic
- Drawn in
- 2 diagrams, 2 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
1 join between diagrams
What is on this wire
Parts (2)
Inline connectors (1)
T17epin817-Pin Connector, white, connector station E-box, plenum chamber
Where these parts are
| Part | Location |
|---|---|
F189 | Integrated in the printed circuit board in the symbol panel located in the shift mechanism covermanual text p. 1302 |
J217 | In electronics box, plenum chambermanual text p. 1122 |
T17e | In electronics box, plenum chambermanual text p. 1101 p. 1102 |
Drawing
Wires are gn/li (green/lilac) unless a colour is written on them. 4 parts and points, 4 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
7 · 6-speed automatic transmission 09L with Tiptronic B6 · 1 stretch
Diagram 7 page · joined to other diagrams at J217/1
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.