Wire between J217 and N88
Net naed5419f · one diagram
- Function
- N88 Solenoid Valve 1 — line to J217 Transmission Control Module 53endpoints onlyBasis: named after the two parts it connects
- Wire
li/ws- Models
- B6 only · 5-speed Tiptronic
- Drawn in
- 1 diagram, 1 stretch
- Checked
- Not checked by hand. Extracted from the manual automatically.
What is on this wire
Parts (2)
Where these parts are
| Part | Location |
|---|---|
J217 | In electronics box, plenum chambermanual text p. 1122 |
N88 | Attached to valve bodymanual text p. 1301 p. 1304 |
Drawing
Wires are li/ws (lilac/white) unless a colour is written on them. 2 parts and points, 1 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.