Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Wire between J136 and V243

Net nac62ffaf · one diagram

Function
V243 Driver's Seat Inclination Adjustment Motor — line to J136 Memory Seat Control Module T12g/5endpoints only
Basis: named after the two parts it connects
Wire
or
Models
B7 only
Drawn in
1 diagram, 1 stretch
Checked
Not checked by hand. Extracted from the manual automatically.

What is on this wire

Parts (2)

  • J136pin T12g/5Memory Seat Control Module
  • V243pin 2Driver's Seat Inclination Adjustment Motor

Where these parts are

PartLocation
J136Under the driver's seat, on the seat frameoutside reference
V243In or under the driver's seatinferred from name

Drawing

Wires are or (orange) unless a colour is written on them. 2 parts and points, 1 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.

98 · Power Driver's Seat and Power Mirrors (with memory) B7 · 1 stretch

Diagram 98 page

Page 587manual · Power driver's seat

TrackWireFromToNotes
25or 1.5 mm²J136 T12g/5V243 2

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.