Wire between E217 and J386
Net n9cae0b3e-75.7 · joined across diagrams
- Function
- E217 Switch for alarm system off — line to J386 Door control module, driver side T32c/32endpoints onlyBasis: named after the two parts it connects
- Wire
ro/ge- Models
- B6 only
- Drawn in
- 3 diagrams, 3 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
2 joins between diagrams
What is on this wire
Parts (2)
Where these parts are
| Part | Location |
|---|---|
E217 | Wired into the driver's door wiring harnessinferred from wiring |
J386 | Integrated in electric window motormanual text p. 1167 |
Drawing
Wires are ro/ge (red/yellow) unless a colour is written on them. 2 parts and points, 1 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
6 · Comfort system B6 · 1 stretch
Diagram 6 page · joined to other diagrams at J386/T32c/32
35 · Comfort system B6 · 1 stretch
Diagram 35 page · joined to other diagrams at J386/T32c/32
318 · Comfort system B6 · 1 stretch
Diagram 318 page · joined to other diagrams at J386/T32c/32
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.