Wire between J386 and K133
Net n8508af8b · joined across diagrams
- Function
- K133 Warning light for central locking -SAFE- — line to J386 Door control module, driver side T32c/28endpoints onlyBasis: named after the two parts it connects
- Wire
sw- Models
- B6 only
- Drawn in
- 3 diagrams, 3 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
2 joins between diagrams
What is on this wire
Parts (2)
Where these parts are
| Part | Location |
|---|---|
J386 | Integrated in electric window motormanual text p. 1167 |
K133 | In the instrument cluster (or in the switch it belongs to)inferred from name |
Drawing
Wires are sw (black) unless a colour is written on them. 2 parts and points, 1 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
6 · Comfort system B6 · 1 stretch
Diagram 6 page · joined to other diagrams at J386/T32c/28
35 · Comfort system B6 · 1 stretch
Diagram 35 page · joined to other diagrams at J386/T32c/28
318 · Comfort system B6 · 1 stretch
Diagram 318 page · joined to other diagrams at J386/T32c/28
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.