Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Wire between J220 and N127

Net n8251d7e7 · one diagram

Function
N127 Ignition Coil 2 with Power Output Stage — line to J220 Motronic Engine Control Module 7endpoints only
Basis: named after the two parts it connects
Wire
ws/bl
Models
B6 only · 4.2 S4
Drawn in
1 diagram, 1 stretch
Checked
Not checked by hand. Extracted from the manual automatically.

What is on this wire

Parts (2)

  • J220pin 7Motronic Engine Control Module (ECM)
  • N127pin 3Ignition Coil 2 with Power Output Stage

Where these parts are

PartLocation
J220In electronics box, plenum chambermanual text p. 1122
N127On the engine, at the cylinder headinferred from name

Drawing

Wires are ws/bl (white/blue) unless a colour is written on them. 2 parts and points, 1 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.

12 · 4.2 l - Injection Engine (253 kW - Motronic - 8 Cylinder) engine code BHF B6 · 1 stretch

Diagram 12 page

Page 146manual · Motronic Engine Control Module (ECM), Ignition Coils

TrackWireFromToNotes
174ws/bl 0.35 mm²J220 7N127 3

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.